After the plaster, you need putty wall.
Putty is applied to the wall in two layers. After the first coat has dried, apply a second. For preparation of putty, you need to take a bucket of water, a spatula and pour plaster on the surface of the water, and thoroughly kneading.
All the mixture is ready for application. Ok, after the completion of all work, you need to clear the wall with sandpaper, from ledges, irregularities and so on.
...
Read more »
|
Plaster walls, done in the first place, and require special skills. You need to prepare a solution of cement and sand. We need to interfere with 3 shovels of sand, and 1 shovel cement. After adding water, we mix solution.
Now, you need to make the beacon on the wall. We need two great snipe, one is nailed on top, the other below.
Then put a profile on the great snipe, and measure the curvature, using a spirit level.And&nbs
...
Read more »
|
In this article we will learn how to do the installation ceiling of plasterboard. Nothing complicated there is no. We need to build a frame of the profiles with the distance between the profiles of 40 cm.
Having measured point on the wall, by water level or laser
 are fixed at the u shaped profile.
![]()
...
Read more »
|
Hello dear visitor of our website. In this article, we will learn to make false ceiling PVC panels. To do this, we need the following tools: preforator, hammer, building knife, water level, construction tape. PVC panels, mounted on a frame made by, or profiles metal or wooden slats. Metal profiles, are following tipes. 1 u shaped, 2 c shaped.
1 2 
...
Read more »
| |