In this article we will learn how to do the installation ceiling of plasterboard. Nothing complicated there is no. We need to build a frame of the profiles with the distance between the profiles of 40 cm.
Having measured point on the wall, by water level or laser
 are fixed at the u shaped profile.
Now, are attached to the c shaped profile, with a pitch of 40 cm, with screws.
Further fasten the brackets to the ceiling.
 
It should look like this.
Further stretch the thread, to verify the accuracy of the frame.
Now you can fasten drywall.
Joining plasterboard, must be fixed with screws.If you do not fix, then droop and will crack.
Both finished with the frame, fasten drywall. Place for fixtures, cut by a knife.
Good luck.
|